Configuring a PEAK CAN Bus Interface
Before you connect to a PEAK interface, make sure you have the PEAK device drivers installed. You can download them here -> https://www.peak-system.com/Drivers.523.0.html?&L=1
To connect to a PEAK channel:
1. Select PEAK from the Manufacturer drop down list.
2. Select a model from the dropdown list. See table below for a list of the supported PEAK Devices.
3. Select the desired Channel Number from the drop down list.
4. Select weather the bus is Classical CAN or CAN FD from the CAN Spec selection.
5. Select the desired baudrate from the Baudrate drop down list.
